sales contact:
E-mail: info@senoparts.com
Tel: +86 15005572679
Add: Jingying E-commerce Industrial Park, No.678 Huaxi Road,Wucheng District, Jinhua City, Zhejiang Province, China
Smartgen HMC6 Protection and Power Management Controller
The HMC6 protection and power management controller is a standard power management system for marine applications. The system carries out generator control, supervision and protection functions. The power management functions are calculated by all diesel generator units, making the system a true multi-master system. One of the diesel generator units is internally defined as the "command unit". This unit is the one where start priority and other power management-related functions are calculated.
The system can handle up to 16 diesel generators to automatic synchronization and load sharing. Should the command unit fail, the power management calculations will automatically be transferred to the next available unit. The internal communication between the units is carried out via internal CANbus. This CANbus is intended for internal communication use only and cannot be connected to other external CANbus systems.
PERFORMANCE AND CHARACTERISTICS
♦Dynamic synchronizing: detect the phase angle difference, voltage
difference and frequency difference automatically to perform
synchronization as soon as possible;
♦Load sharing: Schedule the start and stop of genset and share load equally automatically;
♦Heavy consumer control: Start the additional genset automatically if the power is not enough when the function is active;
♦NEL trip: Trip some non-essential load if over power condition occurs;
♦Light load: The genset is still running if the load has fallen below the shutdown set value when the function is active.
♦Suitable for 3-phase 4-wire, 3-phase 3-wire, single phase 2-wire, and 2-phase 3-wire systems with frequency 50/60Hz.
♦Selectable start mode: Cyclic start; Linear start; Duty Time start;
♦480x272 LCD with backlight, multilingual interface (including
English, Chinese or other languages) which can be chosen at the site,
making commissioning convenient for factory personnel;
♦Parameter setting: parameters can be modified and stored in
internal FLASH memory and cannot be lost even in case of power outage;
most of them can be adjusted using front panel of the controller and all
of them can be modified using PC via USB or RS485 ports;
♦Event Log:Maximum 99 pieces of trip alarms, trip and stop alarms
can be saved in chronological sequence in internal memory, which means
that they will not be lost in case of power off.