sales contact:
E-mail: info@senoparts.com
Tel: +86 15005572679
Add: Jingying E-commerce Industrial Park, No.678 Huaxi Road,Wucheng District, Jinhua City, Zhejiang Province, China
Smartgen HGM7221 Genset Controller
HGM7211/7221 series generator controllers are used for genset automatic and monitor control system of single unit to achieve automatic start/stop , data measurement, alarm protection as well as remote controlling, remote measuring, remote communication function. It fits with TFT display, optional Chinese, English and other languages interface. It is reliable and easy to use.
The powerful 32-bit Mroprocessor contained within the module allows for precision parameters measuring, fixed value adjustment, timing and set value adjusting and etc. Majority parameters can be configured from front panel and all parameters can be configured by USB interface (or RS485) to adjust via PC . It can be widely used in all types of generator automatic control system with compact structure, advanced circuits, simple connections and high reliability.
Modules Comparison
HGM7221 | HGM7211 | |
Digital Input Port | 7 | 7 |
Relay Output Port ① | 8 | 8 |
Sensor Number ② | 5 | 5 |
AMF | ● | |
RS485 | ● | ● |
GSM | ● | ● |
CAN (J1939) | ● | ● |
USB | ● | ● |
Real-time clock | ● | ● |
Event log | ● | ● |
Performance and Characteristics
HGM7X10, Auto Start Module, controls genset to start or stop automatic by remote start signal.
HGM7X20, Auto Main Failure, updates based on HGM7211,especially for automatic system composed by generator and mains.
Main characteristics,
♦ With ARM-based 32-bit SCM, high integration of hardware and more reliable;
♦ 480x272 TFT LCD with backlight, multilingual interface
(including English, Chinese or other languages) which can be chosen at
the site, making commissioning convenient for factory personnel;
♦ Improved TFT LCD wear-resistance and scratch resistance due to hard screen acrylic;
♦ Silicon panel and pushbuttons for better operation in high/low temperature environment;
♦ RS485 communication port enable remote control, remote measuring, remote communication via ModBus protocol;
♦ Equipped with SMS (Short Message Service) function. When genset
is alarming, controller can send short messages via SMS automatically to
max. 5 telephone numbers. besides, generator status can be controlled
and checked using SMS;
♦ Fitted with CANBUS port and can communicate with J1939 genset.
Not only can you monitoring frequently-used data (such as water
temperature, oil pressure, engine speed, fuel consumption and so on) of
ECU machine, but also control start, stop, raising speed and speed droop
via CANBUS port;
♦ Suitable for 3-phase 4-wire, 3-phase 3-wire, single phase
2-wire, and 2-phase 3-wire systems with voltage 120/240V and frequency
50/60Hz;
♦ Collects and shows 3-phase voltage, current, power parameter and frequency of generator/mains.
♦ For Mains, controller has over and under voltage, over and under
frequency, loss of phase and phase sequence wrong detection functions;
For generator, controller has over and under voltage, over and under
frequency, loss of phase, phase sequence wrong, over and reverse power,
over current functions;
♦ 3 fixed analog sensors (temperature, oil pressure and liquid level);
♦ 2 configurable sensors can be set as sensor of temperature or fuel level;
♦ Precision measure and display parameters about Engine,
♦ Protection: automatic start/stop of the gen-set, ATS(Auto
Transfer Switch) control with perfect fault indication and protection
function;
♦ All output ports are relay-out;
♦ Parameter setting: parameters can be modified and stored in
internal EEPROM memory and cannot be lost even in case of power outage;
most of them can be adjusted using front panel of the controller and all
of them can be modified using PC via USB or RS485 ports;
♦ More kinds of curves of temperature, oil pressure, fuel level
can be used directly and users can define the sensor curves by
themselves;
♦ Multiple crank disconnect conditions (speed sensor, oil pressure, generator frequency) are optional;
♦ Widely power supply range DC(8~35)V, suitable to different starting battery voltage environment;
♦ Event log and real-time clock;
♦ Scheduled start & stop generator (can be set as start genset
once a day/week/month whether with load or not; also can be set as
customer weekly in which users can set the start time separately from
Monday to Sunday);
♦ Selectivity configuration. Users can choose different configuration by input port;
♦ Can be used on pumping units and as an indicating instrument (indicate and alarm are enable only, relay is inhibited );
♦ With maintenance function. Actions (warning, shutdown or trip and stop) can be set when maintenance time out;
♦ All parameters used digital adjustment, instead of conventional
analog modulation with normal potentiometer, more reliability and
stability;
♦ Waterproof security level IP55 due to rubber seal installed between the controller enclosure and panel fascia;
♦ Metal fixing clips enable perfect in high temperature environment;
♦ Modular design, self extinguishing ABS plastic enclosure,
pluggable connection terminals and embedded installation way; compact
structure with easy mounting.