Smartgen HAT260 ATS Controller

HAT260 is an Automatic Transfer Switch Control  Module.  The module features 8-Bit microprocessor control. The module is used to  monitor two 3-phase AC supply. Once I# AC supply failure is detected  (under voltage,over voltage,miss phase) , The module Automatically  transfer the switch to II# AC supply, and control generator to start.

FEATURES

Micro-processor based design;
Meter two 3-phase AC Voltages;
Configurable priority of supply Able to Set I# supply priority or II# supply  priority or NONE supply priority;
Set AUTO or MANUAL via PUSHBOTTON mounted on the front panel;
Two isolable N designed;
6 LEDs display the status;
Operational timers can be altered by the customer;
Control generator to Start.

SPECIFICATION

AC supply: 180 to 260 V (50/60Hz) 1.5VA     ◇Under voltage: 265±5 V, Under voltage: 172±5 V.

3-phase AC input: 0 to 460V 50Hz(3 phase)
DC supply: 8 to 35V(1.5VA)
Relay output:
Relay of close I&II: 5A 230VAC
Relay of start genset: 3A 28VDC
Delay timers:
Normal delay time: 1~60s
Abnormal delay time: 1~60s
Start generator time:
1~60s(after road I is abnormal)
Stop generator time:
1~60s(after road I is normal)
Operating Temperature Range:
-30 to +70°C